Original file

Hyundai i30 Bosch MED17.9.8 10SW009638

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Hyundai i30, software number 10SW009638, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i301.6 petrol 135PS
Control unit
Bosch MED17.9.8
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW009638
Software / calibration
GIGD-FE56FS00H00

Technical data

Vehicle
BrandHyundai
Car modeli30
Engine1.6 petrol 135PS
Power135.0PS / 99.3kW
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Software number10SW009638
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key28f530aa7202b752
Identification read from the file
ECU nameMED17.9.8
Read typeCalibration only (data set)
Bosch part / software10SW009638Offset in the file: 0x04001A
Software / calibrationGIGD-FE56FS00H00Offset in the file: 0x07FE0C
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//DCG710P1/GIGD_FE56FS00H00//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW009638. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
10SW007553Hyundai Tucson
10SW007566Kia Sportage
10SW009479Hyundai Tucson
10SW009481Hyundai Tucson
10SW012642Hyundai Veloster
10SW012725Kia Cee'd
10SW014135Hyundai Tucson
10SW014139Kia Sportage

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page