Original file

Hyundai Veloster Bosch MED17.9.8 17980002 / GGFS-BE56FS00600

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Hyundai Veloster, hardware number 17980002 and software number GGFS-BE56FS00600, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Veloster1.6 petrol 140PS
Control unit
Bosch MED17.9.8
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
17980002
Software number
GGFS-BE56FS00600

Technical data

Vehicle
BrandHyundai
Car modelVeloster
Engine1.6 petrol 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Hardware number17980002
Software numberGGFS-BE56FS00600
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key80efe85c2b17c572
Identification read from the file
ECU nameMED17.9.8
Read typeOBD read (no boot area)
ProcessorTC1767
Software / calibrationGGFS-BE56FS00600Offset in the file: 0x07FE0C
Internal build stringME(D)/EDC17 B_CB.02.04.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//1798DCG6/GGFS_BE56FS00600//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 17980002 and software number GGFS-BE56FS00600. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
GTFS-CA46QF02C00Hyundai Veloster
GTFS_CE56FS02600Hyundai Veloster
GTJD-EE56FS00600Kia cee`d
08592741001037551355Škoda Tucson
9112031S009001120031Hyundai Veloster
GGEL-AE56FS0860017980002Hyundai ix 35
GGEL-AE56FS08600GGEL_AE56FS08600Hyundai ix35
GGFS-BE56FS00600Hyundai Veloster

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page