Original file

Kia Sportage Bosch MED17.9.8 GGSL-BE56FS03600 / GGSL-BE56FS03600

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Kia Sportage, hardware number GGSL-BE56FS03600 and software number GGSL-BE56FS03600, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia Sportage1.6 petrol 135PS
Control unit
Bosch MED17.9.8
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GGSL-BE56FS03600
Software number
GGSL-BE56FS03600

Technical data

Vehicle
BrandKia
Car modelSportage
Engine1.6 petrol 135PS
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Hardware numberGGSL-BE56FS03600
Software numberGGSL-BE56FS03600
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7ccc0a999195c50b
Identification read from the file
ECU nameMED17.9.8
Read typeCalibration only (data set)
Software / calibrationGGSL-BE56FS03600Offset in the file: 0x07FE0C
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//1798DCG6/GGSL_BE56FS03600//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GGSL-BE56FS03600 and software number GGSL-BE56FS03600. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
GGEL-AE56FS08600GGEL_AE56FS08600Hyundai ix35
GGFS-BE56FS00600Hyundai Veloster
GGFS-BE56FS01600GGFS_BE56FS01600Hyundai Veloster
GGSL-BE56FS0260017980002Kia Sportage
GGSL-EE56FS036001037550737Kia Sportage
GGVF-BE56FS02600Hyundai I40 BR-PERFORMANCE
GIEL-AE56FS07600Hyundai ix35/Tucson
GIEL-EE56FS0160017980002Hyundai

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page