Original file
Hyundai Sonata Bosch MED17.9.8 GTLF-FP56FS03H00 / GTLF_FP56FS03H00
An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Hyundai Sonata, hardware number GTLF-FP56FS03H00 and software number GTLF_FP56FS03H00, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Hyundai Sonata1.6 · 180.0PS / 132.4kW
- Control unit
- Bosch MED17.9.8
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- GTLF-FP56FS03H00
- Software number
- GTLF_FP56FS03H00
- Bosch part / software
- 10SW012670
Technical data
| Brand | Hyundai |
|---|---|
| Car model | Sonata |
| Engine | 1.6 |
| Fuel | Petrol |
| Power | 180.0PS / 132.4kW |
| Control unit | Bosch MED17.9.8 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GTLF-FP56FS03H00 |
| Software number | GTLF_FP56FS03H00 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 2aed7688a0bef9c5 |
| ECU name | MED17.9.8 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW012670 | Offset in the file: 0x04001A |
| Software / calibration | GTLF-FP56FS03H00 | Offset in the file: 0x07FE0C |
| Bosch project identifier (EPK) | 53/1/MED17/147/MED17.9.8//UCGC20P1/GTLF_FP56FS03H00// | Offset in the file: 0x07FE0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GTLF-FP56FS03H00 and software number GTLF_FP56FS03H00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.8
| Hardware | Software | Vehicles |
|---|---|---|
| GTJD-EE56FS00600 | GTJD_EE56FS00600 | Kia Ceed BR-PERFORMANCE |
| GTJD-GE56FS02600 | GTJD_GE56FS02600 | Kia cee`d |
| GTJF-FP56FS00H00 | GTJF_FP56FS00H00 | Kia K5 |
| GTLF-FP56FS01H00 | 1037554949 | Hyundai Sonata |
| GTQL-GE56FS00600 | GTQL_GE56FS00600 | Kia Sportage |
| GTQL-GE56FS00J00 | 006178 | Kia Sportage |
| GTQL-GE56FS00J00 | GTQL_GE56FS00J00 | Kia Sportage |
| GTQL-GE56FS01J00 | 10SW014139 | Kia Sportage, Kia Tucson, Hyundai |