Original file

Kia Sportage Bosch MED17.9.8 GTQL-GE56FS01J00 / GTQL_GE56FS01J00

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Kia Sportage, hardware number GTQL-GE56FS01J00 and software number GTQL_GE56FS01J00, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia Sportage1.6 petrol · 177.0PS / 130.2kW
Control unit
Bosch MED17.9.8
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
GTQL-GE56FS01J00
Software number
GTQL_GE56FS01J00
Bosch part / software
10SW014139

Technical data

Vehicle
BrandKia
Car modelSportage
Engine1.6 petrol
Power177.0PS / 130.2kW
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Hardware numberGTQL-GE56FS01J00
Software numberGTQL_GE56FS01J00
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5b9ce19e113a7106
Identification read from the file
ECU nameMED17.9.8
Read typeOBD read (no boot area)
ProcessorTC1767
Bosch part / software10SW014139Offset in the file: 0x08001A
Software / calibrationGTQL-GE56FS01J00Offset in the file: 0x07FE0C
Internal build stringME(D)/EDC17 B_CB.02.04.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//UCGC20P1/GTQL_GE56FS01J00//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GTQL-GE56FS01J00 and software number GTQL_GE56FS01J00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Kia SportageFlash2,048.00 KB€15Add to cart

All reads of GTQL-GE56FS01J00 / GTQL_GE56FS01J00

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
GTQL-GE56FS00600GTQL_GE56FS00600Kia Sportage
GTQL-GE56FS00J00006178Kia Sportage
GTQL-GE56FS00J00GTQL_GE56FS00J00Kia Sportage
GTQL-GE56FS01J0010SW014139Kia Sportage, Kia Tucson, Hyundai
GTTL-GE56FS01H00014133Hyundai Tucson
GTTL-GE66FS016001037551355Hyundai Tucson
GTTL-GE66FS01600GTTL_GE66FS01600Hyundai Tucson
GTTL-GE66FS01H001037551355Hyundai Tucson

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page