Original file
Hyundai Tucson Bosch MED17.9.8 GTTL-GE66FS03H00 / GTTL_GE66FS03H00
An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Hyundai Tucson, hardware number GTTL-GE66FS03H00 and software number GTTL_GE66FS03H00, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Hyundai Tucson1.6 · 177.0PS / 130.2kW
- Control unit
- Bosch MED17.9.8
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- GTTL-GE66FS03H00
- Software number
- GTTL_GE66FS03H00
- Bosch part / software
- 10SW014135
Technical data
| Brand | Hyundai |
|---|---|
| Car model | Tucson |
| Engine | 1.6 |
| Fuel | Petrol |
| Power | 177.0PS / 130.2kW |
| Control unit | Bosch MED17.9.8 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GTTL-GE66FS03H00 |
| Software number | GTTL_GE66FS03H00 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 85e9f4e8620a8e59 |
| ECU name | MED17.9.8 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW014135 | Offset in the file: 0x04001A |
| Software / calibration | GTTL-GE66FS03H00 | Offset in the file: 0x07FE0C |
| Bosch project identifier (EPK) | 53/1/MED17/147/MED17.9.8//UCGC20P1/GTTL_GE66FS03H00// | Offset in the file: 0x07FE0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GTTL-GE66FS03H00 and software number GTTL_GE66FS03H00. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.8
| Hardware | Software | Vehicles |
|---|---|---|
| GTTL-GE66FS01H00 | 1037551355 | Hyundai Tucson |
| GTTL-GE66FS01H00 | GTTL_GE66FS01H00 | Hyundai Tucson |
| GTTL-GE66FS02600 | 1037551355 | Hyundai Tucson |
| GTTL-GE66FS02600 | GTTL_GE66FS02600 | Hyundai Tucson |
| GTTL-GE66FS03H00 | 1037551355 | Hyundai Tucson |
| GTTL-HNU6FS01J01 | GTTL_HNU6FS01J01 | Hyundai Tucson |
| GTTL_GE66FS01H00 | 1037551355 | Hyundai Tucson |
| GTTL_GE66FS02900 | 1037551355 | Hyundai Tucson |