Original file

Jaguar F-Pace Bosch MED17.9.9 J8A2-14C570-BUG / 044287

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar F-Pace, hardware number J8A2-14C570-BUG and software number 044287, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Pace2.0 300PS
Control unit
Bosch MED17.9.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
J8A2-14C570-BUG
Software number
044287
Bosch part / software
10SW044287

Technical data

Vehicle
BrandJaguar
Car modelF-Pace
Engine2.0 300PS
FuelPetrol
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberJ8A2-14C570-BUG
Software number044287
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7b01a7c0d533dec5
Identification read from the file
ECU nameMED17.9.9
Read typeCalibration only (data set)
Bosch part / software10SW044287Offset in the file: 0x02001A
Bosch project identifier (EPK)47/1/MED17/190///D1799_P4SSFR_1715BR2_D142_0///Offset in the file: 0x0FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number J8A2-14C570-BUG and software number 044287. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.9

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page