Original file
Jaguar E-Pace Bosch MED17.9.9 J9C3-14C570-BTR / 10SW068241
An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar E-Pace, hardware number J9C3-14C570-BTR and software number 10SW068241, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar E-Pace2.0 200PS
- Control unit
- Bosch MED17.9.9
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- J9C3-14C570-BTR
- Software number
- 10SW068241
Technical data
| Brand | Jaguar |
|---|---|
| Car model | E-Pace |
| Engine | 2.0 200PS |
| Power | 200PS / 147.1kW |
| Control unit | Bosch MED17.9.9 |
|---|---|
| ECU maker | Bosch |
| Hardware number | J9C3-14C570-BTR |
| Software number | 10SW068241 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | c3cdae9ae1576a0e |
| ECU name | MED17.9.9 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW068241 | Offset in the file: 0x02001A |
| Bosch project identifier (EPK) | 47/1/MED17/190///D1799_P4SSMC_1715BR3_D143_1/// | Offset in the file: 0x0FFF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number J9C3-14C570-BTR and software number 10SW068241. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.9
| Hardware | Software | Vehicles |
|---|---|---|
| J9C3-14C570-BTH | J9C3-14C570-BTH | Jaguar E-Pace |
| J9C3-14C570-BTK | 10SW036597 | Jaguar E-Pace |
| J9C3-14C570-BTM | 046225 | Jaguar E-Pace |
| J9C3-14C570-BTM | 10SW046225 | Jaguar E-Type |
| JJ32-14C570-BTF | 10SW036737 | Land Rover Range Rover Evoque |
| JJ32-14C570-BTH | 10SW046220 | Land Rover Range Rover, Land Rover Evoque |
| JJ32-14C570-BTL | 10SW068284 | |
| JK72-14C570-BTC | JK72-14C570-BTC | Land Rover Discovery |