Original file
Jaguar XE Bosch MED17.9.9 JX73-14C570-BTJ / JX73-14C570-BTJ_DF1
An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar XE, hardware number JX73-14C570-BTJ and software number JX73-14C570-BTJ_DF1, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar XE2.0 · 200.0PS / 147.1kW
- Control unit
- Bosch MED17.9.9
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- JX73-14C570-BTJ
- Software number
- JX73-14C570-BTJ_DF1
- Bosch part / software
- 10SW035326
Technical data
| Brand | Jaguar |
|---|---|
| Car model | XE |
| Engine | 2.0 |
| Fuel | Petrol |
| Power | 200.0PS / 147.1kW |
| Control unit | Bosch MED17.9.9 |
|---|---|
| ECU maker | Bosch |
| Hardware number | JX73-14C570-BTJ |
| Software number | JX73-14C570-BTJ_DF1 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 5498377c67526db4 |
| ECU name | MED17.9.9 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW035326 | Offset in the file: 0x02001A |
| Bosch project identifier (EPK) | 47/1/MED17/190///D1799_P4SSFR_1715BR2_D142_0/// | Offset in the file: 0x0FFF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number JX73-14C570-BTJ and software number JX73-14C570-BTJ_DF1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.9
| Hardware | Software | Vehicles |
|---|---|---|
| JX63-14C570-BUG | 10SW046335 | Jaguar XF |
| JX73-14C570-BTE | 10SW022567 | Jaguar XE |
| JX73-14C570-BTE | X760_J1_2P4T20A2250_C2_F_D124A_V6_18175E6 - JX73-14C570-BTE | Jaguar XE 2.0 Si4 Ingenium |
| JX73-14C570-BTJ | JX73-14C570-BTJ | Jaguar XE |
| JX73-14C570-BTK | 10SW046221 | Jaguar XE |
| JX73-14C570-BTL | JX73-14C570-BTL_DF3 | Jaguar XE |
| K8A2-14C570-BFC | K8A2-14C570-BFC | Land Rover Velar |
| K8A2-14C570-BHD | K8A2-14C570-BHD | Jaguar F-Pace |