Original file

Jaguar E-Pace Bosch MED17.9.9 K9C3-14C570-BHF / K9C3-14C570-BHF

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar E-Pace, hardware number K9C3-14C570-BHF and software number K9C3-14C570-BHF, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar E-Pace2.0 · 200.0PS / 147.1kW
Control unit
Bosch MED17.9.9
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
K9C3-14C570-BHF
Software number
K9C3-14C570-BHF
Bosch part / software
10SW041946

Technical data

Vehicle
BrandJaguar
Car modelE-Pace
Engine2.0
FuelPetrol
Power200.0PS / 147.1kW
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberK9C3-14C570-BHF
Software numberK9C3-14C570-BHF
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key934259576ef1173c
Identification read from the file
ECU nameMED17.9.9
Read typeOBD read (no boot area)
Bosch part / software10SW041946Offset in the file: 0x10001A
Bosch project identifier (EPK)46/1/MED17/190///D1799_P4SSMC_1805BR1_IS2_0///Offset in the file: 0x0FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K9C3-14C570-BHF and software number K9C3-14C570-BHF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jaguar E-PaceFlash2,048.00 KB€15Add to cart

All reads of K9C3-14C570-BHF / K9C3-14C570-BHF

Other pairs of Bosch MED17.9.9

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page