Original file

Jaguar XE Bosch MED17.9.9 KX73-14C570-BFD / 10SW044198

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Jaguar XE, hardware number KX73-14C570-BFD and software number 10SW044198, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XE2.0 250PS
Control unit
Bosch MED17.9.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
KX73-14C570-BFD
Software number
10SW044198

Technical data

Vehicle
BrandJaguar
Car modelXE
Engine2.0 250PS
Power250.0PS / 183.9kW
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberKX73-14C570-BFD
Software number10SW044198
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyae8d1c01771a241d
Identification read from the file
ECU nameMED17.9.9
Read typeCalibration only (data set)
Bosch part / software10SW044198Offset in the file: 0x02001A
Bosch project identifier (EPK)47/1/MED17/190///D1799_P4SSFR_1805BR2B_IS0_1///Offset in the file: 0x0FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number KX73-14C570-BFD and software number 10SW044198. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.9

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page