Original file

Land Rover Velar P250 Bosch MED17.9.9 L8A2-14C570-BHG / L8A2-14C570-BHG

An original (stock) flash read of the Bosch MED17.9.9 control unit, fitted in Land Rover Velar P250, hardware number L8A2-14C570-BHG and software number L8A2-14C570-BHG, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Velar P2502.0 · 250.0PS / 183.9kW
Control unit
Bosch MED17.9.9
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
L8A2-14C570-BHG
Software number
L8A2-14C570-BHG
Bosch part / software
10SW062667

Technical data

Vehicle
BrandLand Rover
Car modelVelar P250
Engine2.0
FuelPetrol
Power250.0PS / 183.9kW
Control unit
Control unitBosch MED17.9.9
ECU makerBosch
Hardware numberL8A2-14C570-BHG
Software numberL8A2-14C570-BHG
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key455b084031107cb3
Identification read from the file
ECU nameMED17.9.9
Read typeOBD read (no boot area)
Bosch part / software10SW062667Offset in the file: 0x10001A
Bosch project identifier (EPK)51/1/MED17/190///D1799_P4SSFR_1829BR2B_DTEV3_IS1///Offset in the file: 0x0FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number L8A2-14C570-BHG and software number L8A2-14C570-BHG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.9

HardwareSoftwareVehicles
L8A2-14C570-BFE10SW053965Rover
L8A2-14C570-BFFL560_J1_2P4T20AS250_C2_F_SS_1829BR2B_DTEV3_IS1_200Land Rover Velar DYNO CHIPTUNINGFILES
L8A2-14C570-BHF053967Land Rover Velar
L8A2-14C570-BHG10SW062667Land Rover Velar
L8A2-14C570-BUF10SW062669Jaguar F-Pace
L8D2-14C570-CHG10SW066064Land Rover Range Rover Evoque
L8D2-14C570-CHHL8D2-14C570-CHH_DF1Land Rover Range Rover Evoque
L9C3-14C570-BHC10SW062119Jaguar E-pace

Bosch MED17.9.9 original files

The Bosch MED17.9.9 unit page