Original file

Ford Mondeo Bosch MED17 BG91-14C204-AE / 10SW041430

An original (stock) flash read of the Bosch MED17 control unit, fitted in Ford Mondeo, hardware number BG91-14C204-AE and software number 10SW041430, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo1.6 petrol 160PS
Control unit
Bosch MED17
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BG91-14C204-AE
Software number
10SW041430
Vehicle maker's hardware number
BG91-12A650-AE

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine1.6 petrol 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch MED17
ECU makerBosch
Hardware numberBG91-14C204-AE
Software number10SW041430
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1216c407f25b2515
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software10SW041430Offset in the file: 0x04001A
Vehicle maker's hardware numberBG91-12A650-AEOffset in the file: 0x065076
Software / calibrationBG91-14C204-AEOffset in the file: 0x065063
Bosch project identifier (EPK)58/1/MED17/2/SIG16GGA//D170_02D_106A2_0D023/150618/135746/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BG91-14C204-AE and software number 10SW041430. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17

HardwareSoftwareVehicles
AG9N-14C204-CAG1037506930Volvo V60, Volvo S60
AG9N-14C204-CAG1037523092Volvo V60
BG91-14C204-ABA1037513795Ford Mondeo, Ford S-Max
BG91-14C204-AC1037516421Ford Mondeo, Ford Mondeo 1.6 EcoBoost SCTi
BG91-14C204-AEBG91-14C204-AEFord Mondeo
BG91-14C204-BHCBG91-12A650-BHCFord Mondeo 1.6T
BG91-14C204-BMABG91-14C204-BMAFord Mondeo
BG91-14C204-BSA10SW043092Ford Mondeo

Bosch MED17 original files