Original file

Land Rover Evoque 2.0 Si4 Bosch MED17 BJ32-14C204-MES / 1037535617

An original (stock) flash read of the Bosch MED17 control unit, fitted in Land Rover Evoque 2.0 Si4, hardware number BJ32-14C204-MES and software number 1037535617, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Evoque 2.0 Si42.0 petrol 240.0PS / 176.5kW
Control unit
Bosch MED17
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BJ32-14C204-MES
Software number
1037535617
Vehicle maker's hardware number
BJ32-12A650-MES

Technical data

Vehicle
BrandLand Rover
Car modelEvoque 2.0 Si4
Engine2.0 petrol 240.0PS / 176.5kW
Control unit
Control unitBosch MED17
ECU makerBosch
Hardware numberBJ32-14C204-MES
Software number1037535617
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9b018f50b381f1fe
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037535617Offset in the file: 0x04001A
Vehicle maker's hardware numberBJ32-12A650-MESOffset in the file: 0x06199A
Software / calibrationBJ32-14C204-MESOffset in the file: 0x061976
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0870/270213/150737/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MES and software number 1037535617. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17

HardwareSoftwareVehicles
BG9N-14C204-CAG1037523140Volvo S60
BJ32-14C204-MBM1037522257Land Rover RR Evoque
BJ32-14C204-MBS1037535613Land Rover Range Rover Evoque
BJ32-14C204-MDA10SW011951Land Rover Range Rover Evoque
BV61-14C204-AJE1037515365Ford c max T 2012
BV61-14C204-AJF1037518302Ford C MAX 2011 132.4KWKW
BV61-14C204-ALD1037518999Ford Focus T ECOBOOST Turbo
BV61-14C204-ASA1037522019Ford Focus, Ford Focus 1.6TDCI 2012 110.3KWKW

Bosch MED17 original files