Original file

Ford 2.0 Turbo Ecoboost Bosch MED17 CG91-12A650-AG / 1037524970

An original (stock) flash read of the Bosch MED17 control unit, fitted in Ford 2.0 Turbo Ecoboost, hardware number CG91-12A650-AG and software number 1037524970, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford 2.0 Turbo Ecoboost2.0 petrol 200PS
Control unit
Bosch MED17
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CG91-12A650-AG
Software number
1037524970
Software / calibration
AG91-12B684-AB

Technical data

Vehicle
BrandFord
Car model2.0 Turbo Ecoboost
Engine2.0 petrol 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch MED17
ECU makerBosch
Hardware numberCG91-12A650-AG
Software number1037524970
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key955d6d0d7ec38b85
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037524970Offset in the file: 0x08001A
Vehicle maker's hardware numberCG91-12A650-AGOffset in the file: 0x00FC30
Software / calibrationAG91-12B684-ABOffset in the file: 0x00FC00
Engine descriptionCG91-14C204-AGOffset in the file: 0x062E09
Internal build stringMED170_PBL_67_T3_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)55/1/MED17/2/I420GMO//D170_020_9CU3_0N29/020811/154047/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CG91-12A650-AG and software number 1037524970. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17

Bosch MED17 original files