Original file

Audi Q7 Bosch MED9.1.1 0261S02493 / 1037386865

An original (stock) flash read of the Bosch MED9.1.1 control unit, fitted in Audi Q7, hardware number 0261S02493 and software number 1037386865, 2,544.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q74.2 petrol
Control unit
Bosch MED9.1.1
Read type
Full read (boot area included)
File
2,544.00 KB · Flash
Hardware number
0261S02493
Software number
1037386865
Bosch part / software
0261S02202
Vehicle maker's hardware number
4L0907560A
Software / calibration
4L0910560B

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine4.2 petrol
Control unit
Control unitBosch MED9.1.1
ECU makerBosch
Hardware number0261S02493
Software number1037386865
File
File typeOriginal flash read
File size2,544.00 KB (2,605,056 bytes)
File key6e7c7d84bbe258f7
Identification read from the file
ECU nameMED9.1.1
Read typeFull read (boot area included)
Bosch part / software0261S02202 / 1037386865Offset in the file: 0x1D2E91 / 0x1D2E9C
Vehicle maker's hardware number4L0907560AOffset in the file: 0x1DCE95
Software / calibration4L0910560B · version 0070Offset in the file: 0x1D2E6A
Engine description4.2l V8/4V FSIOffset in the file: 0x1D2E77
Bosch project identifier (EPK)57/1/MED91/5/8442.01//D91154_44E900/D91154_44E900/121206/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02493 and software number 1037386865. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q7 4.2 FSIFlash2,560.00 KB€15Add to cart

All reads of 0261S02493 / 1037386865

Other pairs of Bosch MED9.1.1

HardwareSoftwareVehicles
0261S024821037389462Audi S6, Audi C6 5.2 V10 FSI, Audi S6 5.2 V10 FSI - 435hp
0261S024821037393910Audi S6
0261S024901037393928Audi Q7 4.2 FSI V8
0261S024911037399060Audi 4L 4.2 V8 FSI
0261S024931037399061Audi Q7 2010y 4.2L
0261S024971037394695Audi A6
0261S025481037392758Audi S5, Audi S5 4.2 FSI V8, Audi S5 -
0261S025781037391612Audi S8

Bosch MED9.1.1 original files

The Bosch MED9.1.1 unit page