Original file

Audi R8 5.2 FSI Stage 10 Bosch MED9.1.2 0261S02523 / 1037397223

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi R8 5.2 FSI Stage 10, hardware number 0261S02523 and software number 1037397223, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R8 5.2 FSI Stage 105.2 petrol 525.0PS / 386.1kW
Control unit
Bosch MED9.1.2
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S02523
Software number
1037397223
Vehicle maker's hardware number
420907552A
Software / calibration
420910552E

Technical data

Vehicle
BrandAudi
Car modelR8 5.2 FSI Stage 10
Engine5.2 petrol 525.0PS / 386.1kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02523
Software number1037397223
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key12da18328bba1946
Identification read from the file
ECU nameMED9.1
Read typeOBD read (no boot area)
Bosch part / software0261S02523 / 1037397223Offset in the file: 0x1D7843 / 0x1D784E
Vehicle maker's hardware number420907552AOffset in the file: 0x1E293B
Software / calibration420910552E · version 0020Offset in the file: 0x1D781C
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D7829
Bosch project identifier (EPK)60/1/MED91/5/10450.01//56FLMA2JG_49H1/56FLMA2JG_49H1/080508/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02523 and software number 1037397223. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S023711037398562Audi RS6, Audi RS6 5.0TFSI, Audi RS6 5.0 TFSI V10
0261S024651037400762Audi R8, Audi R8 5.2 FSI V10, Audi R8 5.2 V10 FSI
0261S024651037501803Audi R8
0261S024651037506948Audi R8, Audi R8 5.2 FSI
0261S025231037507113Audi R8
0261S025691037396311Lamborghini LP560
0261S025691037400036Lamborghini Gallardo, Lamborghini Gallardo LP560, Lamborghini LP560
0261S025731037395110Audi RS6, Audi RS6 -, Audi RS6 5.0TFSI V10 2008

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page