Original file

Audi Bosch MED9.1.2 0261S02748 / 1037535812

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi, hardware number 0261S02748 and software number 1037535812, 2,562.50 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi5.2 petrol 525PS
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,562.50 KB · Flash
Hardware number
0261S02748
Software number
1037535812
Bosch part / software
0261S02899
Vehicle maker's hardware number
420907552B
Software / calibration
424910552J

Technical data

Vehicle
BrandAudi
Engine5.2 petrol 525PS
Power525.0PS / 386.1kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02748
Software number1037535812
File
File typeOriginal flash read
File size2,562.50 KB (2,624,000 bytes)
File key1a1a3fb90ff25357
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02899 / 1037535812Offset in the file: 0x1D43E5 / 0x1D43F0
Vehicle maker's hardware number420907552BOffset in the file: 0x1E2F8B
Software / calibration424910552J · version 0010Offset in the file: 0x1D43BE
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D43CB
Bosch project identifier (EPK)68/1/MED91/5/10450.01//56FLMA2JG_51D3_020/56FLMA2JG_51D3_020/230413/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02748 and software number 1037535812. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi R8Flash2,562.50 KB€15Add to cart
Audi R8Flash2,562.50 KB€15Add to cart
Audi R8Flash2,562.50 KB€15Add to cart
Audi R8 5.2 FSI V10 QuattroFlash2,048.00 KB€15Add to cart

All reads of 0261S02748 / 1037535812

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S027101037507879Audi R8
0261S027441037512672Audi R8
0261S02748Audi R8 Vorserie
0261S027481037512151Audi R8 5.2 FSI V10 Quattro, Audi R8
0261S027491037502022Lamborghini Gallardo, Lamborghini LP560 5.2 FSI V10, Lamborghini LP560
0261S0275910SW003144Lamborghini Gallardo
0261S027641037502771Lamborghini Gallardo
0261S027641037510576Lamborghini Superleggera

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page