Original file

Audi RS3 2.5 TFSI OLE Bosch MED9.1.2 0261S02825 / 1037517123

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi RS3 2.5 TFSI OLE, hardware number 0261S02825 and software number 1037517123, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS3 2.5 TFSI OLE2.5 petrol
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S02825
Software number
1037517123
Bosch part / software
0261S02792
Vehicle maker's hardware number
8J0907404M
Software / calibration
8J0907404J

Technical data

Vehicle
BrandAudi
Car modelRS3 2.5 TFSI OLE
Engine2.5 petrol
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02825
Software number1037517123
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key03baf55b5b90a593
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02792 / 1037517123Offset in the file: 0x1D8032 / 0x1D803D
Vehicle maker's hardware number8J0907404MOffset in the file: 0x1E36B7
Software / calibration8J0907404J · version 0020Offset in the file: 0x1D800B
Engine description2.5l R5/4V TFSIOffset in the file: 0x1D8018
Bosch project identifier (EPK)37/1/MED91/5/5425.01//_085/20/020311/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02825 and software number 1037517123. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S028221037535813Audi R8
0261S028231037516444Audi R8
0261S02825Audi RS3
0261S028251037517006Audi RS3, Audi RS3 2.5 TFSI, Audi RS3 2.0 TFSI
0261S028251037519001Audi RS3, Audi RS3 2011y MED 9.1.2, Audi RS3 2.5 TFSI
0261S028251037526644Audi RS3, Audi RS3 2.5 TFSI, Audi A3
0261S0282510SW007123Audi RS3
0261S028258P0907404Audi 8P

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page