Original file

Audi Bosch MED9.1.2 0261S02825 / 1037519001

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi, hardware number 0261S02825 and software number 1037519001, 2,562.50 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.5 petrol 340PS
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,562.50 KB · Flash
Hardware number
0261S02825
Software number
1037519001
Vehicle maker's hardware number
8J0907404M
Software / calibration
8P0907404

Technical data

Vehicle
BrandAudi
Engine2.5 petrol 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02825
Software number1037519001
File
File typeOriginal flash read
File size2,562.50 KB (2,624,000 bytes)
File key77815801001659b0
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02825 / 1037519001Offset in the file: 0x258032 / 0x25803D
Vehicle maker's hardware number8J0907404MOffset in the file: 0x2636B7
Software / calibration8P0907404 · version 0040Offset in the file: 0x25800B
Engine description2.5l R5/4V TFSIOffset in the file: 0x258018
Bosch project identifier (EPK)67/1/MED91/5/5425.01//58ATTA2JG_49F0_085/58ATTA2JG_49F0_085/270511/Offset in the file: 0x2421F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02825 and software number 1037519001. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS3 Sportback 340 BHPFlash · From the file name: Audi RS3 Sportback 2.5 3402,560.00 KB€15Add to cart
Audi RS3Flash2,560.00 KB€15Add to cart
Audi RS3Flash2,560.00 KB€15Add to cart
Audi RS3 2011y MED 9.1.2Flash with its EEPROM · From the file name: Audi RS3 2011y 2.5 TFSI2,048.00 KB€20Add to cart
Audi RS3Flash2,562.50 KB€15Add to cart
Audi RS3Flash2,048.00 KB€15Add to cart
Audi RS3Flash2,562.50 KB€15Add to cart
Audi RS3Flash2,560.00 KB€15Add to cart
Audi RS3Flash2,560.00 KB€15Add to cart
Audi RS3 2011y MED 9.1.2Flash with its EEPROM · From the file name: Audi RS3 2011y 2.5 TFSI1,040.06 KB€20Add to cart
Audi RS3Flash2,562.50 KB€15Add to cart
Audi RS3Flash2,562.50 KB€15Add to cart

All reads of 0261S02825 / 1037519001

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S028231037516444Audi R8
0261S02825Audi RS3
0261S028251037517006Audi RS3, Audi RS3 2.5 TFSI, Audi RS3 2.0 TFSI
0261S028251037517123Audi RS3 2.5 TFSI OLE
0261S028251037526644Audi RS3, Audi RS3 2.5 TFSI, Audi A3
0261S0282510SW007123Audi RS3
0261S028258P0907404Audi 8P
0261S028321037527742Audi R8

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page