Original file

Audi 8P Bosch MED9.1.2 0261S02825 / 8P0907404

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi 8P, hardware number 0261S02825 and software number 8P0907404, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi 8P2.5 petrol · 340PS / 250.1kW
Control unit
Bosch MED9.1.2
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0261S02825
Software number
8P0907404
Bosch part / software
10SW007123
Vehicle maker's hardware number
8J0907404M

Technical data

Vehicle
BrandAudi
Car model8P
Engine2.5 petrol
Power340PS / 250.1kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02825
Software number8P0907404
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyb1a726879e8526fc
Identification read from the file
ECU nameMED9.1
Read typeOBD read (no boot area)
Bosch part / software0261S02825 / 10SW007123Offset in the file: 0x1D8032 / 0x1D803D
Vehicle maker's hardware number8J0907404MOffset in the file: 0x1E36B7
Software / calibration8P0907404 · version 0060Offset in the file: 0x1D800B
Engine description2.5l R5/4V TFSIOffset in the file: 0x1D8018
Bosch project identifier (EPK)67/1/MED91/5/5425.01//58ATTA2JG_49F0_085/58ATTA2JG_49F0_085/181115/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02825 and software number 8P0907404. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S028251037517123Audi RS3 2.5 TFSI OLE
0261S028251037519001Audi RS3, Audi RS3 2011y MED 9.1.2, Audi RS3 2.5 TFSI
0261S028251037526644Audi RS3, Audi RS3 2.5 TFSI, Audi A3
0261S0282510SW007123Audi RS3
0261S028321037527742Audi R8
0261S028351037517073Audi TT2 RS, Audi RS3, Audi RS3 2.5 TFSI 360hp
0261S028351037526648Audi TT RS, Audi TT RS+, Audi TT RS+ 2.5 TFSI V5
0261S0283510SW007866Audi TT, Audi TT RS plus

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page