Original file

Audi R8 Bosch MED9.1.2 0261S02862 / 1037522368

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi R8, hardware number 0261S02862 and software number 1037522368, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol · 560.0PS / 411.9kW
Control unit
Bosch MED9.1.2
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S02862
Software number
1037522368
Vehicle maker's hardware number
420907552B
Software / calibration
42B910552J

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol
Power560.0PS / 411.9kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02862
Software number1037522368
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye8dbdf5b3c73f125
Identification read from the file
ECU nameMED9.1
Read typeOBD read (no boot area)
Bosch part / software0261S02862 / 1037522368Offset in the file: 0x1D43E5 / 0x1D43F0
Vehicle maker's hardware number420907552BOffset in the file: 0x1E2F23
Software / calibration42B910552J · version 0010Offset in the file: 0x1D43BE
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D43CB
Bosch project identifier (EPK)68/1/MED91/5/10450.01//56FLMA2JG_51D3_010/56FLMA2JG_51D3_010/060911/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02862 and software number 1037522368. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page