Original file

Audi R8 Bosch MED9.1.2 0261S02888 / 1037528644

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi R8, hardware number 0261S02888 and software number 1037528644, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol · 520.0PS / 382.5kW
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02888
Software number
1037528644
Vehicle maker's hardware number
420907552B
Software / calibration
423910552D

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol
Power520.0PS / 382.5kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02888
Software number1037528644
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyce3856667bd2a2c8
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02888 / 1037528644Offset in the file: 0x1D4931 / 0x1D493C
Vehicle maker's hardware number420907552BOffset in the file: 0x1E5FE5
Software / calibration423910552D · version 0030Offset in the file: 0x1D490A
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D4917
Bosch project identifier (EPK)62/1/MED91/5/10450.01//56HDLA2KG_M53E0/56HDLA2KG_M53E0/060712/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02888 and software number 1037528644. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page