Original file

Audi R8 Bosch MED9.1.2 0261S02889 / 1037531168

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi R8, hardware number 0261S02889 and software number 1037531168, 2,562.50 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R84.2 petrol 420PS
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,562.50 KB · Flash
Hardware number
0261S02889
Software number
1037531168
Vehicle maker's hardware number
420907560C
Software / calibration
424910560J

Technical data

Vehicle
BrandAudi
Car modelR8
Engine4.2 petrol 420PS
Power420.0PS / 308.9kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02889
Software number1037531168
File
File typeOriginal flash read
File size2,562.50 KB (2,624,000 bytes)
File key7be3032d6cf45dac
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02889 / 1037531168Offset in the file: 0x2547F5 / 0x254800
Vehicle maker's hardware number420907560COffset in the file: 0x26545D
Software / calibration424910560J · version 0050Offset in the file: 0x2547CE
Engine description4.2L V8HDZ/4V FSIOffset in the file: 0x2547DB
Bosch project identifier (EPK)61/1/MED91/5/8542.08//54CDLA2KG_M53E1/54CDLA2KG_M53E1/270912/Offset in the file: 0x2421F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02889 and software number 1037531168. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page