Original file

Audi RS3 Bosch MED9.1.2 8J0907404M / 1037526644

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Audi RS3, hardware number 8J0907404M and software number 1037526644, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS3
Control unit
Bosch MED9.1.2
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
8J0907404M
Software number
1037526644
Software / calibration
8P0907404

Technical data

Vehicle
BrandAudi
Car modelRS3
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number8J0907404M
Software number1037526644
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameL533CC0
File key6f6df5f86780be9c
Identification read from the file
ECU nameMED9.1
Read typeOBD read (no boot area)
Bosch part / software1037526644Offset in the file: 0x1D803D
Vehicle maker's hardware number8J0907404MOffset in the file: 0x1E36B7
Software / calibration8P0907404 · version 0050Offset in the file: 0x1D800B
Engine description2.5l R5/4V TFSIOffset in the file: 0x1D8018
Bosch project identifier (EPK)67/1/MED91/5/5425.01//58ATTA2JG_49F0_085/58ATTA2JG_49F0_085/100512/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8J0907404M and software number 1037526644. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S028981037535969Audi R8
0261S033071037537031Audi R8
0261S033091037535506Audi
0261S033101037535445Audi R8, Audi R8 5.2 FSI V10 Quattro
0261S033121037535505Audi
8J0907404M1037517006Audi RS3
8J0907404M8J0907404MAudi RS3
8P0907404Audi TTRS

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page