Original file

Volkswagen Passat Bosch MED9.1.3 0261S02169 / 1037376323

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen Passat, hardware number 0261S02169 and software number 1037376323, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.6 petrol · 299.9PS / 220.6kW
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02169
Software number
1037376323
Software / calibration
03H906032C

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.6 petrol
Power299.9PS / 220.6kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02169
Software number1037376323
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Passat 3.6 FSI
File keyaf41b6ee1e7f47cf
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02169 / 1037376323Offset in the file: 0x1CEC2C / 0x1CEC37
Software / calibration03H906032C · version 7003Offset in the file: 0x1CEC05
Engine descriptionP3.6 FSI-LEV2Offset in the file: 0x1CEC12
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D9135_S42C7P0/D9135_S42C7P0/230305/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02169 and software number 1037376323. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S021671037394776Volkswagen
0261S021681037390353Volkswagen
0261S021681037394468Volkswagen
0261S021691037379115Volkswagen Passat
0261S021691037390359Volkswagen
0261S021691037394469Volkswagen
0261S021911037394777Volkswagen
0261S021941037382945Audi Q7 3.6 FSI VR6

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page