Original file

Volkswagen Passat Bosch MED9.1.3 0261S02169 / 1037379115

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen Passat, hardware number 0261S02169 and software number 1037379115, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.6 · 300.0PS / 220.6kW
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02169
Software number
1037379115
Software / calibration
03H906032C

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.6
Power300.0PS / 220.6kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02169
Software number1037379115
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyceef0103afdfe88d
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02169 / 1037379115Offset in the file: 0x1CF053 / 0x1CF05E
Software / calibration03H906032C · version 8363Offset in the file: 0x1CF02C
Engine descriptionP 3.6-FSI-LEV2Offset in the file: 0x1CF039
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D9135_S43K2P0/D9135_S43K2P0/111005/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02169 and software number 1037379115. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S021671037394776Volkswagen
0261S021681037390353Volkswagen
0261S021681037394468Volkswagen
0261S021691037376323Volkswagen Passat
0261S021691037390359Volkswagen
0261S021691037394469Volkswagen
0261S021911037394777Volkswagen
0261S021941037382945Audi Q7 3.6 FSI VR6

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page