Original file

Volkswagen Bosch MED9.1.3 0261S02415 / 1037543865

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen, hardware number 0261S02415 and software number 1037543865, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen
Control unit
Bosch MED9.1.3
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0261S02415
Software number
1037543865
Vehicle maker's hardware number
03H906032E
Software / calibration
03H906032AG

Technical data

Vehicle
BrandVolkswagen
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02415
Software number1037543865
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key8ceef9589423ead2
Identification read from the file
ECU nameMED9.1.3
Read typeOBD read (no boot area)
Bosch part / software0261S02415 / 1037543865Offset in the file: 0x1CF03D / 0x1CF048
Vehicle maker's hardware number03H906032EOffset in the file: 0x1D7B9E
Software / calibration03H906032AG · version 6651Offset in the file: 0x1CF016
Engine descriptionT-3.6-FSI-LEV2Offset in the file: 0x1CF023
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D9137_N43P8T0/D9137_N43P8T0/200314/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02415 and software number 1037543865. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S023561037391119Volkswagen Passat
0261S023561037399163Volkswagen Passat, Volkswagen Passat R36
0261S023561037501744Volkswagen Passat
0261S024151037394778Volkswagen
0261S024541037399164Volkswagen Passat 2008 Benzin 220.6KWKW
0261S025261037514406Audi
0261S025291037397698Audi 4L 3.6 FSI, Audi Q7
0261S025311037514408

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page