Original file

Volkswagen Passat Bosch MED9.1.3 0261S02564 / 1037390336

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen Passat, hardware number 0261S02564 and software number 1037390336, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.6
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02564
Software number
1037390336
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032BS

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.6
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02564
Software number1037390336
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya74ef040458e3672
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02564 / 1037390336Offset in the file: 0x1CF08B / 0x1CF096
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D8364
Software / calibration03H906032BS · version 1409Offset in the file: 0x1CF064
Engine descriptionP3.6-FSI-LEV2Offset in the file: 0x1CF071
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913F_N45C5P0/D913F_N45C5P0/170407/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02564 and software number 1037390336. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S025291037397698Audi 4L 3.6 FSI, Audi Q7
0261S025311037514408
0261S025631037390335Volkswagen Passat 3.6 FSI R36
0261S025631037393289Volkswagen
0261S025641037393290Volkswagen
0261S025841037390409Volkswagen Touareg
0261S025841037501208Volkswagen
0261S025871037513868Volkswagen

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page