Original file

Audi Q7 Bosch MED9.1.3 0261S02597 / 1037396392

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Audi Q7, hardware number 0261S02597 and software number 1037396392, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q73.6 petrol · 280.1PS / 206.0kW
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02597
Software number
1037396392
Vehicle maker's hardware number
03H906032G
Software / calibration
03H906032DG

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine3.6 petrol
Power280.1PS / 206.0kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02597
Software number1037396392
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyee75f3a270d2ac1d
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02597 / 1037396392Offset in the file: 0x1CF41F / 0x1CF42A
Vehicle maker's hardware number03H906032GOffset in the file: 0x1D8A90
Software / calibration03H906032DG · version 2473Offset in the file: 0x1CF3F8
Engine descriptionQ7 3.6-FSI-7MHOffset in the file: 0x1CF405
Bosch project identifier (EPK)56/1/MED91/3/6W6432.D//D913H_45L2I0/D913H_45L2I0/310308/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02597 and software number 1037396392. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S025841037390409Volkswagen Touareg
0261S025841037501208Volkswagen
0261S025871037513868Volkswagen
0261S025941037514407
0261S026001037399506Škoda Superb 3.6 FSI V6, Škoda Superb 2 3.6 FSI V6, Škoda Superb
0261S026161037396324Volkswagen Passat 2007 Benzin 220.6KWKW
0261S026251037394385Volkswagen Passat, Volkswagen Passat 2008 Benzin 220.6KWKW
0261S026251037399165Volkswagen Passat, Volkswagen Passat 3.6L FSI, Volkswagen Passat 3.6 FSI R36

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page