Original file

Škoda Superb 2 3.6 FSI V6 Bosch MED9.1.3 0261S02600 / 1037399506

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Škoda Superb 2 3.6 FSI V6, hardware number 0261S02600 and software number 1037399506, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Superb 2 3.6 FSI V63.6 petrol 260.0PS / 191.2kW
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02600
Software number
1037399506
Software / calibration
03H906032DL

Technical data

Vehicle
BrandŠkoda
Car modelSuperb 2 3.6 FSI V6
Engine3.6 petrol 260.0PS / 191.2kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02600
Software number1037399506
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key7e5dfffe4e0c8bc8
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02600 / 1037399506Offset in the file: 0x1CEDE3 / 0x1CEDEE
Software / calibration03H906032DL · version 3816Offset in the file: 0x1CEDBC
Engine descriptionSk3.6-FSI-EU5Offset in the file: 0x1CEDC9
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913E_N45CBP0/D913E_N45CBP0/100908/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02600 and software number 1037399506. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda SuperbFlash2,048.00 KB€15Add to cart
Škoda Superb 3.6 FSI V6Flash8,192.00 KB€15Add to cart

All reads of 0261S02600 / 1037399506

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S025841037501208Volkswagen
0261S025871037513868Volkswagen
0261S025941037514407
0261S025971037396392Audi Q7
0261S026161037396324Volkswagen Passat 2007 Benzin 220.6KWKW
0261S026251037394385Volkswagen Passat, Volkswagen Passat 2008 Benzin 220.6KWKW
0261S026251037399165Volkswagen Passat, Volkswagen Passat 3.6L FSI, Volkswagen Passat 3.6 FSI R36
0261S026261037399166Volkswagen

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page