Original file

Volkswagen Passat 2007 Benzin 220.6KWKW Bosch MED9.1.3 0261S02616 / 1037396324

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen Passat 2007 Benzin 220.6KWKW, hardware number 0261S02616 and software number 1037396324, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat 2007 Benzin 220.6KWKW3.6 petrol · 299.9PS / 220.6kW
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02616
Software number
1037396324
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032DN

Technical data

Vehicle
BrandVolkswagen
Car modelPassat 2007 Benzin 220.6KWKW
Engine3.6 petrol
Power299.9PS / 220.6kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02616
Software number1037396324
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Passat 3.6 FSI 2007
File key73a2bbbccc60592e
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02616 / 1037396324Offset in the file: 0x1CF307 / 0x1CF312
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D88D2
Software / calibration03H906032DN · version 3056Offset in the file: 0x1CF2E0
Engine descriptionP3.6-FSI-ULEV2Offset in the file: 0x1CF2ED
Bosch project identifier (EPK)56/1/MED91/3/6W6432.D//D913F_45L3P0/D913F_45L3P0/190308/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02616 and software number 1037396324. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S025871037513868Volkswagen
0261S025941037514407
0261S025971037396392Audi Q7
0261S026001037399506Škoda Superb 3.6 FSI V6, Škoda Superb 2 3.6 FSI V6, Škoda Superb
0261S026251037394385Volkswagen Passat, Volkswagen Passat 2008 Benzin 220.6KWKW
0261S026251037399165Volkswagen Passat, Volkswagen Passat 3.6L FSI, Volkswagen Passat 3.6 FSI R36
0261S026261037399166Volkswagen
0261S026311037393771Volkswagen Passat

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page