Original file

Volkswagen Bosch MED9.1.3 0261S02657 / 1037394477

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen, hardware number 0261S02657 and software number 1037394477, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen
Control unit
Bosch MED9.1.3
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0261S02657
Software number
1037394477
Software / calibration
03H997033S

Technical data

Vehicle
BrandVolkswagen
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02657
Software number1037394477
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key70dc1a091eb430f3
Identification read from the file
ECU nameMED9.1.3
Read typeOBD read (no boot area)
Bosch part / software0261S02657 / 1037394477Offset in the file: 0x1CF3F8 / 0x1CF403
Software / calibration03H997033S · version 2637Offset in the file: 0x1CF3D1
Engine descriptionT-GP EU2Offset in the file: 0x1CF3DE
Bosch project identifier (EPK)56/1/MED91/3/6W6432.D//D913B_44H1T0/D913B_44H1T0/030108/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02657 and software number 1037394477. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page