Original file

Volkswagen Passat CC / CC Bosch MED9.1.3 0261S02712 / 1037399166

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen Passat CC / CC, hardware number 0261S02712 and software number 1037399166, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat CC / CC3.6 petrol 240PS
Control unit
Bosch MED9.1.3
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02712
Software number
1037399166
Bosch part / software
0261S02626
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032DR

Technical data

Vehicle
BrandVolkswagen
Car modelPassat CC / CC
Engine3.6 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02712
Software number1037399166
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6de2851b3d0a131c
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02626 / 1037399166Offset in the file: 0x1CEDE3 / 0x1CEDEE
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D81FE
Software / calibration03H906032DR · version 3491Offset in the file: 0x1CEDBC
Engine descriptionCC3.6-FSI-EU2Offset in the file: 0x1CEDC9
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913E_N45CBP0/D913E_N45CBP0/190808/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02712 and software number 1037399166. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S026601037503732Volkswagen
0261S026611037503734Volkswagen
0261S026641037503733Volkswagen
0261S026791037398063Volkswagen Passat 3.6 FSI V6, Volkswagen Passat
0261S027131037501831Volkswagen Passat
0261S027571037501774Škoda Superb, Škoda Superb 3.6 FSI V6, Škoda Superb 2
0261S027841037527885Volkswagen
0261S028031037507161Volkswagen

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page