Original file

Volkswagen Bosch MED9.1.3 0261S02806 / 1037507168

An original (stock) flash read of the Bosch MED9.1.3 control unit, fitted in Volkswagen, hardware number 0261S02806 and software number 1037507168, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen
Control unit
Bosch MED9.1.3
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0261S02806
Software number
1037507168
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H997034J

Technical data

Vehicle
BrandVolkswagen
Control unit
Control unitBosch MED9.1.3
ECU makerBosch
Hardware number0261S02806
Software number1037507168
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key9fe9bc3e4a64e769
Identification read from the file
ECU nameMED9.1.3
Read typeOBD read (no boot area)
Bosch part / software0261S02806 / 1037507168Offset in the file: 0x1CF0BF / 0x1CF0CA
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D8398
Software / calibration03H997034J · version 6602Offset in the file: 0x1CF098
Engine descriptionP3.6-FSI-LEV2Offset in the file: 0x1CF0A5
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913F_N45C6P0/D913F_N45C6P0/101209/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02806 and software number 1037507168. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.3

HardwareSoftwareVehicles
0261S027571037501774Škoda Superb, Škoda Superb 3.6 FSI V6, Škoda Superb 2
0261S027841037527885Volkswagen
0261S028031037507161Volkswagen
0261S028041037507162Volkswagen
0261S028071037507174Volkswagen
0261S028081037507173Volkswagen
0261S028091037507175Volkswagen
0261S028101037507177Volkswagen

Bosch MED9.1.3 original files

The Bosch MED9.1.3 unit page