Original file

Audi S3 Bosch MED9.1.5 0261S02337 / 1037398619

An original (stock) flash read of the Bosch MED9.1.5 control unit, fitted in Audi S3, hardware number 0261S02337 and software number 1037398619, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S3petrol
Control unit
Bosch MED9.1.5
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02337
Software number
1037398619
Bosch part / software
0261S02575
Vehicle maker's hardware number
8P0907115B
Software / calibration
8P0907115AB

Technical data

Vehicle
BrandAudi
Car modelS3
Enginepetrol
Displacement2.0
Control unit
Control unitBosch MED9.1.5
ECU makerBosch
Hardware number0261S02337
Software number1037398619
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2ffff400d0891215
Identification read from the file
ECU nameMED9.1.5
Read typeFull read (boot area included)
Bosch part / software0261S02575 / 1037398619Offset in the file: 0x1D2D76 / 0x1D2D81
Vehicle maker's hardware number8P0907115BOffset in the file: 0x1DDD58
Software / calibration8P0907115AB · version 0020Offset in the file: 0x1D2D4F
Engine description2.0l R4/4V TFSIOffset in the file: 0x1D2D5C
Bosch project identifier (EPK)57/1/MED91/5/4420.01//D915C_N45D610/D915C_N45D610/280708/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02337 and software number 1037398619. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.5

HardwareSoftwareVehicles
0261S023341037386638Volkswagen Passat, Volkswagen Passat / Magotan
0261S023351037386818Volkswagen Eos, Volkswagen Eos 2.0 TFSI, Volkswagen Jetta 2007 Turbo Benzin
0261S023371037384432Volkswagen Golf 5 GTI ed30
0261S023371037386637Seat Leon, Seat Leon Cupra, Seat Leon 2.0 TFSI
0261S023391037381208Škoda Octavia, Škoda New Octavia, Škoda New Octavia 2007 Turbo
0261S023391037386859Škoda Octavia, Škoda Octavia 2, Škoda New Octavia
0261S023401037386858Audi A3, Audi A3 2.0 TFSI
0261S023411037381186Audi A3 2.0 TFSI, Audi A3, Audi A3 Turbo Benzin 147.1KWKW

Bosch MED9.1.5 original files

The Bosch MED9.1.5 unit page