Original file

Audi A6 Bosch MED9.1.5 0261S02559 / 1037386852

An original (stock) flash read of the Bosch MED9.1.5 control unit, fitted in Audi A6, hardware number 0261S02559 and software number 1037386852, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A62.0 petrol · 170.0PS / 125.0kW
Control unit
Bosch MED9.1.5
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02559
Software number
1037386852
Bosch part / software
0261S02291
Software / calibration
4F2910115B

Technical data

Vehicle
BrandAudi
Car modelA6
Engine2.0 petrol
Power170.0PS / 125.0kW
Control unit
Control unitBosch MED9.1.5
ECU makerBosch
Hardware number0261S02559
Software number1037386852
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc23cf892fac880b3
Identification read from the file
ECU nameMED9.1.5
Read typeFull read (boot area included)
Bosch part / software0261S02291 / 1037386852Offset in the file: 0x1D24CD / 0x1D24D8
Software / calibration4F2910115B · version 0040Offset in the file: 0x1D24A6
Engine description2.0l R4/4V TFSIOffset in the file: 0x1D24B3
Bosch project identifier (EPK)57/1/MED91/5/4420.01//D9157_N43J103/D9157_N43J103/301106/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02559 and software number 1037386852. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.5

HardwareSoftwareVehicles
0261S025551037394888
0261S025561037389097
0261S025571037394887Audi RS4
0261S025581037534098Audi A3 2.0 TFSI - 200hp, Audi A6
0261S025591037525946Audi
0261S025751037395160Audi S3, Audi S3 2.0 TFSI, Audi A3 2.0 TFSI
0261S025751037398619Audi S3
0261S025761037395161Audi S3

Bosch MED9.1.5 original files

The Bosch MED9.1.5 unit page