Original file

Audi S3 Bosch MED9.1.5 0261S02721 / 1037501227

An original (stock) flash read of the Bosch MED9.1.5 control unit, fitted in Audi S3, hardware number 0261S02721 and software number 1037501227, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S32.0 petrol 265PS
Control unit
Bosch MED9.1.5
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02721
Software number
1037501227
Vehicle maker's hardware number
8P0907115B
Software / calibration
8P0907115AP

Technical data

Vehicle
BrandAudi
Car modelS3
Engine2.0 petrol 265PS
Power265.0PS / 194.9kW
Control unit
Control unitBosch MED9.1.5
ECU makerBosch
Hardware number0261S02721
Software number1037501227
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi S3 2.0 TFSI 2009
File keyeae47bff8662162b
Identification read from the file
ECU nameMED9.1.5
Read typeFull read (boot area included)
Bosch part / software0261S02721 / 1037501227Offset in the file: 0x1D2D76 / 0x1D2D81
Vehicle maker's hardware number8P0907115BOffset in the file: 0x1DDD58
Software / calibration8P0907115AP · version 0010Offset in the file: 0x1D2D4F
Engine description2.0l R4/4V TFSIOffset in the file: 0x1D2D5C
Bosch project identifier (EPK)57/1/MED91/5/4420.01//D915C_N45D610/D915C_N45D610/100209/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02721 and software number 1037501227. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
AudiFlash2,048.00 KB€15Add to cart
Audi S3Flash · From the file name: Audi S3 8P 2010 265PS2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart
Audi S3Flash2,048.00 KB€15Add to cart

All reads of 0261S02721 / 1037501227

Other pairs of Bosch MED9.1.5

HardwareSoftwareVehicles
0261S026841037399512Seat Exeo
0261S026841037400841Seat Exeo
0261S026871037501376Audi TT
0261S026991037504349Seat Leon, Seat Leon Cupra, Seat Leon 2.0 TSI
0261S027231037501292Audi S3
0261S027241037500526Seat Leon
0261S027241037502834Seat Leon, Seat Leon Cupra, Seat Ibiza Cupra R
0261S027251037500914Audi TT, Audi TT S, Audi TTS

Bosch MED9.1.5 original files

The Bosch MED9.1.5 unit page