Original file

Audi A8 Bosch MED9.1.x 0261S02198 / 1037389009

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi A8, hardware number 0261S02198 and software number 1037389009, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.2 petrol
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02198
Software number
1037389009
Software / calibration
4E1910560A

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.2 petrol
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02198
Software number1037389009
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A8 Typ D3 4.2
File keyff2e18518a620225
Identification read from the file
ECU nameMED9.1.1
Read typeFull read (boot area included)
Bosch part / software0261S02198 / 1037389009Offset in the file: 0x1D3057 / 0x1D3062
Software / calibration4E1910560A · version 0050Offset in the file: 0x1D3030
Engine description4.2l V8/4VOffset in the file: 0x1D303D
Bosch project identifier (EPK)57/1/MED91/5/8442.01//D91151_44E900/D91151_44E900/200207/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02198 and software number 1037389009. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S021651037387528Audi RS4, Audi RS4 Avant
0261S021681037393756Volkswagen Passat
0261S021681037393771Volkswagen Passat
0261S021731037386852Audi A6
0261S021991037386829Audi A6
0261S022021037381166Audi Q7 4.2 FSI, Audi Q7 V8 4.2FSI
0261S022021037382103Audi Q7
0261S022051037387530Audi A4 4.2 FSI

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page