Original file

Audi RS6 Bosch MED9.1.x 0261S02371 / 1037396722

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi RS6, hardware number 0261S02371 and software number 1037396722, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS65.0 petrol 580PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02371
Software number
1037396722
Bosch part / software
0261S02573
Vehicle maker's hardware number
4F1907552A
Software / calibration
4F5910552

Technical data

Vehicle
BrandAudi
Car modelRS6
Engine5.0 petrol 580PS
Power580.0PS / 426.6kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02371
Software number1037396722
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2773529ddd5840ff
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02573 / 1037396722Offset in the file: 0x1D55BA / 0x1D55C5
Vehicle maker's hardware number4F1907552AOffset in the file: 0x1DFF2F
Software / calibration4F5910552 · version 0060Offset in the file: 0x1D5593
Engine description5.0L V10/4V TFSIOffset in the file: 0x1D55A0
Bosch project identifier (EPK)68/1/MED91/5/10450.01//55BC6A2JG_48C1_073/55BC6A2JG_48C1_073/150408/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02371 and software number 1037396722. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S023621037381496Audi A4
0261S023621037386605Audi A4
0261S023671037381921Audi S6 V10, Audi S6 V10 2005 Benzin
0261S023681037386651Audi TT, Audi TT2, Audi TT 8J
0261S024361037384968Audi Q7
0261S024371037389471Audi Q7
0261S024421037501227Audi S3
0261S024541037394342Volkswagen Passat

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page