Original file

Audi Q7 Bosch MED9.1.x 0261S02490 / 1037390780

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi Q7, hardware number 0261S02490 and software number 1037390780, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q74.2 petrol
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02490
Software number
1037390780
Vehicle maker's hardware number
4L0907560A
Software / calibration
4L0910560F

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine4.2 petrol
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02490
Software number1037390780
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc78bd331c4a5491b
Identification read from the file
ECU nameMED9.1.1
Read typeFull read (boot area included)
Bosch part / software0261S02490 / 1037390780Offset in the file: 0x1D30D9 / 0x1D30E4
Vehicle maker's hardware number4L0907560AOffset in the file: 0x1DDAB9
Software / calibration4L0910560F · version 0020Offset in the file: 0x1D30B2
Engine description4.2l V8/4VOffset in the file: 0x1D30BF
Bosch project identifier (EPK)57/1/MED91/5/8442.01//D91154_48E000/D91154_48E000/310507/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02490 and software number 1037390780. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S024771037387561Seat Leon Cupra 2.0 TFSI, Seat Leon Cupra 2006 Turbo, Seat Leon
0261S024791037391088Volkswagen Eos, Volkswagen Golf, Volkswagen A3 2.0 TFSI
0261S024841037397674Audi S6
0261S024861037396632Audi A8
0261S024931037510529Audi Q7
0261S024981037398708Audi A6
0261S025091037391084Volkswagen Golf, Volkswagen Golf 5 GTI 2.0 TFSI, Volkswagen Golf 5 GTI 147.1KWKW
0261S025101037389073Volkswagen Passat

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page