Original file

Volkswagen Passat Bosch MED9.1.x 0261S02510 / 1037389073

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Volkswagen Passat, hardware number 0261S02510 and software number 1037389073, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat2.0 petrol 200PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02510
Software number
1037389073
Vehicle maker's hardware number
8P0907115B
Software / calibration
3C0907115S

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine2.0 petrol 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02510
Software number1037389073
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyacb6cf150de2eecb
Identification read from the file
ECU nameMED9.1.5
Read typeFull read (boot area included)
Bosch part / software0261S02510 / 1037389073Offset in the file: 0x1D2A65 / 0x1D2A70
Vehicle maker's hardware number8P0907115BOffset in the file: 0x1DD7B8
Software / calibration3C0907115S · version 0010Offset in the file: 0x1D2A3E
Engine description2.0l R4/4V TFSIOffset in the file: 0x1D2A4B
Bosch project identifier (EPK)55/1/MED91/5/4420.01//D9158_44D000/D9158_44D000/220207/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02510 and software number 1037389073. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S024901037390780Audi Q7
0261S024931037510529Audi Q7
0261S024981037398708Audi A6
0261S025091037391084Volkswagen Golf, Volkswagen Golf 5 GTI 2.0 TFSI, Volkswagen Golf 5 GTI 147.1KWKW
0261S025111037389061Volkswagen Eos 2.0 TFSI, Volkswagen Eos, Volkswagen Golf
0261S025121037389074Audi A3 2.0 TFSI, Audi A3, Audi Golf5
0261S025201037387550Audi TT, Audi TT 2.0 TFSI, Audi TT 2.0 TFSI 200hp
0261S025261037390292Audi Q7 3.6L

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page