Original file

Audi S3 Bosch MED9.1.x 0261S02699 / 1037384214

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi S3, hardware number 0261S02699 and software number 1037384214, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi S32.0 petrol · 265.0PS / 194.9kW
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02699
Software number
1037384214
Bosch part / software
0261S02342
Vehicle maker's hardware number
8P0907115B
Software / calibration
8P0907115H

Technical data

Vehicle
BrandAudi
Car modelS3
Engine2.0 petrol
Power265.0PS / 194.9kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02699
Software number1037384214
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb27abaf52c77fa24
Identification read from the file
ECU nameMED9.1.5
Read typeFull read (boot area included)
Bosch part / software0261S02342 / 1037384214Offset in the file: 0x1D22AD / 0x1D22B8
Vehicle maker's hardware number8P0907115BOffset in the file: 0x1DCE74
Software / calibration8P0907115H · version 0020Offset in the file: 0x1D2286
Engine description2.0l R4/4V TFSIOffset in the file: 0x1D2293
Bosch project identifier (EPK)57/1/MED91/5/4420.01//D915A_N43J050/D915A_N43J050/090806/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02699 and software number 1037384214. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S026691037539446Audi S5
0261S026711037504405Audi R8
0261S026721037500805Audi R8
0261S026961037400653Škoda Superb 2 3.6 FSI V6
0261S026991037501375Seat Leon, Seat Leon Cupra
0261S027001037503615Audi TT RS, Audi TT RS 2.5 TFSI V5
0261S027071037504340Audi S5 4.2 FSI V8
0261S027071037509255Audi

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page