Original file

Volkswagen Passat Bosch MED9.1.x 0261S02712 / 1037400738

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Volkswagen Passat, hardware number 0261S02712 and software number 1037400738, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.6 · 300.0PS / 220.6kW
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02712
Software number
1037400738
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032FR

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.6
FuelPetrol
Power300.0PS / 220.6kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02712
Software number1037400738
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keya58772db6c5886d5
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02712 / 1037400738Offset in the file: 0x1CEFD0 / 0x1CEFDB
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D8644
Software / calibration03H906032FR · version 4854Offset in the file: 0x1CEFA9
Engine descriptionCC3.6-FSI-7MHOffset in the file: 0x1CEFB6
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913E_N45CEP0/D913E_N45CEP0/110309/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02712 and software number 1037400738. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen Passat SIMON !!Flash2,560.00 KB€15Add to cart

All reads of 0261S02712 / 1037400738

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S027071037509255Audi
0261S027071037526783Audi
0261S027071037539923Audi S5
0261S027091037505122Audi S6 S6 5.2 FSI V10
0261S027221037501291Audi S3, Audi S3 DREW !, Audi A3
0261S027261037504492Seat Exeo, Seat Exeo 2.0 TFSI, Seat Exeo 2.0 TSI 7AT - 200hp
0261S027351037504147Volkswagen Scirocco, Volkswagen Scirocco R, Volkswagen Scirocco R 2.0 TSI
0261S027361037507223Volkswagen Golf, Volkswagen Scirocco

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page