Original file

Audi R8 5.2 FSI V10 Quattro Bosch MED9.1.x 0261S02899 / 1037535812

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi R8 5.2 FSI V10 Quattro, hardware number 0261S02899 and software number 1037535812, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R8 5.2 FSI V10 Quattro5.2 petrol 525PS
Control unit
Bosch MED9.1.x
Read type
OBD read (no boot area)
File
2,560.00 KB · Flash
Hardware number
0261S02899
Software number
1037535812
Vehicle maker's hardware number
420907552B
Software / calibration
424910552J

Technical data

Vehicle
BrandAudi
Car modelR8 5.2 FSI V10 Quattro
Engine5.2 petrol 525PS
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02899
Software number1037535812
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyad7ff2a3ad1ebbc6
Identification read from the file
ECU nameMED9.1
Read typeOBD read (no boot area)
Bosch part / software0261S02899 / 1037535812Offset in the file: 0x1D43E5 / 0x1D43F0
Vehicle maker's hardware number420907552BOffset in the file: 0x1E2F8B
Software / calibration424910552J · version 0010Offset in the file: 0x1D43BE
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D43CB
Bosch project identifier (EPK)68/1/MED91/5/10450.01//56FLMA2JG_51D3_020/56FLMA2JG_51D3_020/230413/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02899 and software number 1037535812. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S028258J0907404MAudi RS3
0261S028271037396366Audi RS4
0261S028321037535969Audi R8
0261S028461037516929Audi S5
0261S033031037535446Audi R8
0261S033041037535813Audi R8
0261S033191037544431Volkswagen Scirocco, Volkswagen COPY 2i, Volkswagen Scirocco COPY THIS ONE !
03H906032AM1037393968Volkswagen Passat R36

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page