Original file

Fiat Tipo Bosch MED9 0261S12801 / 004594

An original (stock) flash read of the Bosch MED9 control unit, fitted in Fiat Tipo, hardware number 0261S12801 and software number 004594, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Tipo
Control unit
Bosch MED9
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S12801
Software number
004594
Bosch part / software
10SW004594
Vehicle maker's hardware number
55268853
Software / calibration
1730S3903B3

Technical data

Vehicle
BrandFiat
Car modelTipo
Control unit
Control unitBosch MED9
ECU makerBosch
Hardware number0261S12801
Software number004594
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW Tipo
File key4180cdf485b6d3e0
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S12801 / 10SW004594Offset in the file: 0x062512 / 0x08001A
Vehicle maker's hardware number55268853Offset in the file: 0x06252D
Software / calibration1730S3903B3Offset in the file: 0x07FF08
Internal build string11B.14.00.00RBOffset in the file: 0x00E5A8
Bosch project identifier (EPK)35/1/MED17/9/ME1730//1730S3903B3///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12801 and software number 004594. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9

HardwareSoftwareVehicles
0233R0738RD0937RRenault Megane III
0261S024071039S26677Opel GT
0261S079431037522181Ford S Max 2.0SCTI 2012
0261S091801037525731Ford Focus T 20V 2012
0281667388DAF XF105, DAF CF410
02E927770AL1216054660Volkswagen Golf
0395860154Porsche
03F906070EC2287222222Seat 1.2TSI 2012 77.2KWKW Siemens

Bosch MED9 original files