Original file

Audi TT Bosch MED9

An original (stock) flash read of the Bosch MED9 control unit, fitted in Audi TT, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandAudi
Car modelTT
Engine2.0 petrol 230PS
Fuelpetrol
Displacement2.0
Power230.0PS / 169.2kW
Control unit
Control unitBosch MED9
ECU makerBosch
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8edf569b8f3c7961
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch MED9

HardwareSoftwareVehicles
Bosch MED9
Alpina B3Alpina B3
Audi A3Audi A3
Audi S3Audi S3
BMWBMW
Bentley ContinentalBentley Continental
Buick Excelle GTBuick Excelle GT
Buick RegalBuick Regal

Bosch MED9 original files