Original file

Mazda 2 Bosch MED9 P5CK-18881-E / P5CK-18881-E

An original (stock) flash read of the Bosch MED9 control unit, fitted in Mazda 2, hardware number P5CK-18881-E and software number P5CK-18881-E, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mazda 21.5 petrol 75PS
Control unit
Bosch MED9
File size
2,048.00 KB
Contents
Flash
Hardware number
P5CK-18881-E
Software number
P5CK-18881-E

Technical data

Vehicle
BrandMazda
Car model2
Engine1.5 petrol 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch MED9
ECU makerBosch
Hardware numberP5CK-18881-E
Software numberP5CK-18881-E
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key03f1ac92d54325a2

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number P5CK-18881-E and software number P5CK-18881-E. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9

Bosch MED9 original files