Original file

Jaguar XF PROTEAM ENGINEERING Bosch MEDC17.9 GX63-12K532-FLC / GX63-12K532-FLC

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Jaguar XF PROTEAM ENGINEERING, hardware number GX63-12K532-FLC and software number GX63-12K532-FLC, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF PROTEAM ENGINEERING2.0 163PS
Control unit
Bosch MEDC17.9
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GX63-12K532-FLC
Software number
GX63-12K532-FLC
Bosch part / software
10SW014150

Technical data

Vehicle
BrandJaguar
Car modelXF PROTEAM ENGINEERING
Engine2.0 163PS
FuelDiesel
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX63-12K532-FLC
Software numberGX63-12K532-FLC
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7d825a4fd42f5a18
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW014150Offset in the file: 0x02001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C084_3_20///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX63-12K532-FLC and software number GX63-12K532-FLC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page