Original file

Jaguar XE Bosch MEDC17.9 GX73-12K532-FKB / 10SW010819

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Jaguar XE, hardware number GX73-12K532-FKB and software number 10SW010819, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XE2.0 diesel 163PS
Control unit
Bosch MEDC17.9
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
GX73-12K532-FKB
Software number
10SW010819

Technical data

Vehicle
BrandJaguar
Car modelXE
Engine2.0 diesel 163PS
Power163.0PS / 119.9kW
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberGX73-12K532-FKB
Software number10SW010819
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key01ff63269796b2c2
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW010819Offset in the file: 0x22001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C084_3_20///Offset in the file: 0x220078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12K532-FKB and software number 10SW010819. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page